S0327551

HE*Gloves,heavy-duty,rubber/nitrile,M


Cleaning gloves, heavy-duty, reusable, for sturdy cleaning in households and Health Treatment Centres. Made of nitrile, neoprene or similar synthetic rubber, to PPE standards compliance. Unit is pair, size: Medium.
Indicative Price USD 1.08
Disclaimer: The images shown are for illustration purposes only and may not be an exact representation of the product. “No Generic Photo Available" means that there is not an image available for this product.

General Description:
Cleaning gloves, heavy-duty, reusable, for Sturdy cleaning in Households and Health Treatment Centres under Ebola crisis. Made of nitrile, neoprene or similar synthetic rubber, to PPE standards compliance. Unit is pair, and in Medium size.

Technical Specifications:
Cleaning gloves, heavy-duty, reusable, for Sturdy cleaning use in both Households and Health Treatment Centres under Ebola crisis. Made of nitrile, neoprene or similar synthetic rubber, to PPE standards compliance.
Unit is pair, and in Medium size.

The reusable gloves are able to resist frequent carrying of heavy bags and very frequent washing inside-outside in chlorinated water. Drying of wet gloves may be in direct sun.

Characteristics:
Reusable, heavy duty gloves,
High cracking-, puncture- and abrasion resistant
Powder free, Seamless, and entirely waterproof

Material:
Nitrile, synthetic rubber (no Latex),
Knit inner lining facilitates slide-in and removal
Cleanable with water and disinfectant (resisting both ethanol solutions 70% and chlorine solutions 0.5%)
NOTE: During preparation works of chlorine solutions, the gloves may potentially be exposed short-term to considerable higher concentrations of maybe 10-50 times higher than the final solution of 0.5%, and shall resist to several such exposures.
Material thickness, at level of the fingers, not less than: 0.38mm
Length not less than: 30cm
Size: Medium
Supply co-packed as one left/right pair

Compliance required with Personal Protective Equipment Directive (89/686/EEC) - Category 3.
EN 388 - Protection from Mechanical Hazard, Abrasion Level 4, Cutting, Tear and Puncture not less than level 1 each (i.e minimum 4111).
EN 374-1, EN 374-2 (at least level 2), EN 374-4 and EN 374-5
EN 420 + A1 General Requirements for protective gloves
Related Products